Encore SATA2 RAID PCIE CARD VER. 2.00 Bedienungsanleitung PDF herunterladen (Seite 9)

Mar/07 MN

11. When asked Are you sure to exit(Y/N)?, press Y to exit and

reboot.

CONCATENATION (JBOD)

This RAID array allows you to use one or two hard drives to a

JBOD(Just a Bunch Of Disks) array. Although JBOD doesn’t offer

other RAID functionality, it makes the hard disks appear to be a single

one by combining the drives into one larger logical one without any

capacity loss.

Rebuilding a Failed Mirror Set

When a failure to one member occurs, you will be notified by the

RAID BIOS during boot. The steps below will guide you in rebuilding

a failed mirror set.

1. Replace he failed drive(s) with one of equal or greater capacity,

then start the computer.

2. During boot press Ctrl+S or F4 to enter the RAID BIOS.

3. Select Create RAID Set press Enter.

4. Select SPARE DRIVE, then press Enter.

5. Select the single hard drive then press Enter.

6. Input RAID size, press Enter. When asked Are You Sure(Y/N)?,

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Keine Kommentare

Encore SATA2 RAID PCIE CARD VER. 2.00 Bedienungsanleitung Seite 9