Encore N150 Bedienungsanleitung PDF herunterladen (Seite 66)

ENHWI-3GN3 User’s Manual

www.encore-usa.com

• Port Mapping Tab

Port Mapping allows you to re-direct a particular range of service port numbers (from

the Internet / WAN Port) to a particular LAN IP address. It helps you to host servers

behind the router NAT firewall.

Enable Port Mapping: Enable or disable port mapping function.

Description: description of this setting.

Local IP: This is the local IP of the server behind the NAT firewall.

Protocol: This is the protocol type to be forwarded. You can choose to forward

“TCP” or “UDP” packets only, or select “BOTH” to forward both “TCP” and

“UDP” packets.

Port Range: The range of ports to be forward to the private IP.

Add Port Mapping

Fill in the "Local IP", “Protocol”, “Port Range” and "Description" of the setting to be

added and then click "Add". Then this Port Mapping setting will be added into the

"Current Port Mapping Table" below. If you find any typo before adding it and want

to retype again, just click <Reset> and the fields will be cleared.

Remove Port Mapping

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 93 94

Keine Kommentare

Encore N150 Bedienungsanleitung Seite 66