Encore ENDSL-A2PLUS4R2 Bedienungsanleitung PDF herunterladen (Seite 52)

[Static Route]

Select this option to set Static Routing information.

Destination IP Address: This parameter specifies the IP network address of the final

destination of packets routed by this rule.

IP Subnet Mask: Enter the subnet mask for this destination.

Gateway IP Address: Enter the IP address of the gateway. A gateway does the actual

forwarding of the packets. Enter the gateway’s IP address in the field or select which PVC you

wish to act as a gateway.

The gateway is an immediate neighbor of your ADSL Router that will forward the packet to the

destination. On the LAN, the gateway must be a router on the same segment as your Router;

over Internet (WAN), the gateway must be the IP address of one of the remote nodes.

Metric: Metric represents the “cost” of transmission for routing purposes. IP Routing uses hop

count as the measurement of cost, with a minimum of 1 for directly connected networks. Enter a

number that approximates the cost for this link. The number need not to be precise, but it must

between 1 and 15. In practice, 2 or 3 is usually a good number.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 84 85

Keine Kommentare

Encore ENDSL-A2PLUS4R2 Bedienungsanleitung Seite 52